The Borg & Overström B3 is a premium mains-fed water dispenser designed to provide fresh, filtered water in workplaces, schools, hospitality environments and other communal spaces.
Available with combinations of chilled, ambient, sparkling and hot water, the B3 offers a practical alternative to bottled water deliveries while supporting the use of refillable cups, sports bottles and jugs.
Its compact floorstanding design includes a hygienic touch-sensitive control panel, a generous 265mm dispensing area and a durable finish designed for regular use in shared environments.
Care Vending can provide the B3 with professional installation, filtration, servicing, sanitisation and ongoing technical support.
Fresh Filtered Water on Demand
The Borg & Overström B3 connects directly to the building’s potable mains water supply.
Water passes through a suitable filtration system before being chilled, carbonated, heated or dispensed at ambient temperature, depending on the selected configuration.
This gives users convenient access to filtered drinking water throughout the day without requiring large plastic bottles to be stored, lifted and replaced.
A mains-fed system can also reduce the need to arrange bottled-water deliveries and provide a more consistent supply in busy locations.
Available Water Configurations
The B3 can be supplied in several configurations, allowing the water options to be matched to the intended environment.
Published configurations include:
- Chilled and ambient water
- Chilled, sparkling and ambient water
- Chilled, ambient and hot water
- Chilled, sparkling and hot water
This flexibility allows organisations to choose a straightforward chilled-water dispenser or create a more comprehensive refreshment point offering hot drinks and sparkling water.
Chilled Water for Workplaces and Communal Areas
The Borg & Overström B3 provides chilled filtered water for users filling cups, glasses and reusable bottles.
The manufacturer publishes a chilled and sparkling water output capacity of up to 30 litres per hour.
This makes the machine suitable for offices, reception areas, schools and other locations where several users may require drinking water throughout the day.
The published chilled-water temperature begins at approximately 2°C, with the maximum stated chilled temperature listed as 11°C. Actual dispensing temperature may vary according to usage and site conditions.
DeepSparkle® Sparkling Water
Selected configurations include Borg & Overström’s DeepSparkle® technology.
This system is designed to create sparkling water with a distinctive and long-lasting level of carbonation.
Providing sparkling water alongside chilled still water can increase user choice and offer an alternative to bottled fizzy drinks.
A suitable carbon dioxide supply is required for sparkling-water models. The cylinder size, storage position and replacement schedule should be considered as part of the installation and service plan.
Instant Hot Water Option
Hot-water configurations can provide water for tea, coffee and other instant beverages.
The published hot-water temperature is approximately 92°C, with a stated minimum of 80°C.
The manufacturer lists a hot-water output capacity of up to 6 litres per hour.
This can reduce reliance on kettles in smaller offices, reception areas and communal kitchens. However, expected peak usage should be considered carefully to ensure the available hot-water capacity is appropriate.
Large Dispense Area for Bottles and Jugs
The B3 has a published dispensing height of 265mm.
This generous space is designed to accommodate reusable sports bottles and jugs as well as ordinary cups and glasses.
Supporting bottle refills can encourage users to drink more water while reducing demand for disposable plastic bottles and single-use cups.
The bottle or jug should be positioned centrally beneath the dispensing outlet to reduce splashing and prevent water from entering the drip tray unnecessarily.
Designed for Adults and Children
The floorstanding B3 has been designed at a practical height for use by both adults and children.
This can make it suitable for schools, colleges, family-focused venues and other settings where users of different heights need access to drinking water.
The final installation position should still be assessed carefully to ensure that the controls, dispensing area and surrounding floor space remain safe and accessible.
Hygienic Touch-Sensitive Controls
The B3 features a flush touch-sensitive control panel rather than raised mechanical buttons.
The smooth surface is easier to wipe clean and avoids the gaps around traditional controls where dirt and contaminants may accumulate.
Regular cleaning remains essential, especially in busy communal environments. The control panel, dispense area, drip tray and external surfaces should be included within the site’s routine hygiene schedule.
Optional Hands-Free Footswitch
A hands-free footswitch is available as an optional accessory.
This allows users to dispense selected water options without touching the main control panel.
The footswitch can be useful in:
- Healthcare environments
- Manufacturing facilities
- Schools and colleges
- Hospitality areas
- Busy offices
- Public-facing communal spaces
The exact footswitch configuration required will depend on the number and type of water selections available on the dispenser.
Durable Fynil® Finish
The Borg & Overström B3 uses a durable Fynil® exterior finish designed for hardworking communal environments.
The manufacturer describes the surface as non-porous and resistant to scratches, tarnishing and impacts.
This helps the unit retain its appearance while also providing an external surface that can be cleaned effectively.
The B3 is available in black and silver finishes, allowing the dispenser to coordinate with a range of workplace and hospitality interiors.
Direct Chill Cooling System
The B3 uses Borg & Overström’s Direct Chill system.
The manufacturer describes this as a sealed and environmentally considerate cooling system designed to chill water efficiently without storing a large volume in an open reservoir.
A direct-chill arrangement can help maintain a fresh water supply while reducing the opportunity for stored water to become stagnant.
Cooling performance will depend on factors such as incoming mains-water temperature, room conditions and the frequency of use.
Multi-Stage Water Filtration
A suitable water filter forms an important part of the B3 installation.
Filtration can help improve the taste and appearance of mains water while protecting internal components from sediment and other contaminants.
The correct filter will depend on local water quality, anticipated usage and the selected dispenser configuration.
Filters must be replaced at the recommended interval. Leaving a filter in service beyond its capacity can reduce water quality and restrict flow through the dispenser.
Borg & Overström B3 Key Features
- Premium mains-fed water dispenser
- Floorstanding design
- Chilled water options
- Ambient water options
- Hot-water options
- DeepSparkle® sparkling-water technology
- Up to 30 litres per hour of chilled or sparkling water
- Up to 6 litres per hour of hot water
- Flush touch-sensitive control panel
- Optional hands-free footswitch
- Large 265mm dispensing area
- Suitable for refillable bottles and jugs
- Direct Chill cooling system
- Filtered mains-fed water
- Durable non-porous Fynil® finish
- Available in black or silver
- Tamper-resistant rear cover guard
- Compact floorstanding footprint
Technical Specifications
| Machine type | Mains-fed floorstanding water dispenser |
|---|---|
| Width | 325mm |
| Depth | 380mm |
| Height | 1,065mm |
| Dispensing height | 265mm |
| Water options | Chilled, ambient, sparkling and hot, depending on configuration |
| Chilled-water temperature | From approximately 2°C, with a published maximum of 11°C |
| Hot-water temperature | Approximately 92°C, with a published minimum of 80°C |
| Chilled and sparkling capacity | Up to 30 litres per hour |
| Hot-water capacity | Up to 6 litres per hour |
| Cooling system | Direct Chill |
| Sparkling-water technology | DeepSparkle® on compatible models |
| Controls | Flush touch-sensitive control panel |
| Hands-free operation | Optional footswitch |
| Available finishes | Black or silver |
| Standard warranty | One-year limited manufacturer warranty |
The precise specification will depend on the chosen water combination and accessories. Care Vending will confirm the current model, filtration, electrical and installation requirements when preparing your quotation.
Installation Requirements
The Borg & Overström B3 should be installed by an approved and suitably trained provider.
Published installation requirements include:
- A suitable power socket with a 10A supply
- The power supply positioned within two metres of the unit
- A potable mains-water supply within two metres
- A minimum incoming water pressure of 0.1MPa or one bar
- A mains waste connection or compatible alarmed waste kit
- An appropriate installation kit
- A suitable water filter
- Enough space for access and servicing
The proposed position should be checked before installation to confirm water, electricity, drainage, floor condition and ventilation requirements.
Mains Waste or Alarmed Waste Kit
Waste water from spills and the dispensing area must be managed appropriately.
Where possible, the machine can be connected to a suitable mains waste outlet.
If a permanent waste connection is not available, a compatible alarmed waste container may be used. This must be checked and emptied regularly to prevent overflow.
The most appropriate arrangement will depend on the installation location and frequency of use.
A Bottleless Alternative to Delivered Water
The B3 is a bottleless water dispenser, meaning it uses the property’s mains-water supply rather than replaceable large bottles.
This can reduce:
- Plastic bottle use
- Storage requirements
- Manual handling of heavy bottles
- Water-delivery administration
- The risk of running out between deliveries
- Waste associated with disposable packaging
It also gives users convenient access to locally supplied, filtered water through reusable bottles, cups and glasses.
Supporting More Sustainable Hydration
Installing a mains-fed dispenser can help an organisation reduce its dependence on single-use plastic bottles.
The B3’s large dispensing space supports reusable vessels, making it easier for staff, students, visitors and customers to refill their own bottles.
The manufacturer also states that PFAS, PFOA and PFOS substances have not been intentionally added to its water pathways.
The overall environmental impact of an installation will depend on usage, filter replacement, electricity consumption, carbon dioxide supply and the types of reusable vessels chosen.
Suitable Commercial Applications
The Borg & Overström B3 is suitable for locations requiring a compact and dependable filtered water service.
Potential applications include:
- Corporate offices
- Schools and colleges
- Universities
- Hotels and hospitality venues
- Healthcare facilities
- Reception areas
- Car dealerships
- Leisure centres and gyms
- Manufacturing facilities
- Warehouses and distribution centres
- Public buildings
- Staff breakout areas
- Meeting and conference facilities
- Customer waiting rooms
- Communal refreshment areas
Complete Water Dispenser Support from Care Vending
Care Vending can provide the Borg & Overström B3 as part of a complete workplace hydration service.
Our available services include:
- Water dispenser rental or hire
- Machine purchase
- Site assessment
- Professional delivery and installation
- Water and electrical connection
- Waste-kit installation
- Filter installation
- Initial setup and testing
- Operator guidance
- Scheduled sanitisation
- Replacement water filters
- Carbon dioxide supply for sparkling models
- Preventative maintenance
- Technical support and repairs
Our team will consider the number of users, preferred water options, expected peak demand and available services before recommending the most suitable B3 configuration.
Tips for Getting the Best from Your Borg & Overström B3
Choose the Right Water Combination
Consider how the dispenser will be used. Chilled and ambient water may be sufficient for general hydration, while hot or sparkling water can provide a more complete refreshment service.
Size the Machine for Peak Demand
Do not consider only average daily use. Review how many people may refill bottles or make hot drinks during breaks, meetings or shift changes.
Replace Filters on Schedule
Follow the recommended filter capacity and replacement interval. A neglected filter may restrict water flow and reduce taste quality.
Clean the Dispensing Area Daily
Wipe the touch panel, nozzles, drip tray and bottle-filling area regularly using suitable cleaning products.
Use the Footswitch in Busy Shared Areas
The optional foot control can reduce contact with the main interface and may be worthwhile in high-use communal locations.
Monitor the Waste Container
If an internal waste kit is used rather than mains drainage, check it frequently and respond promptly to any alarm.
Keep Carbon Dioxide Available
Sparkling-water models require an appropriate carbon dioxide supply. Monitor usage and arrange replacement cylinders before the current one becomes empty.
Use Refillable Bottles
Encourage staff and visitors to use reusable bottles that fit comfortably within the 265mm dispensing area.
Arrange Regular Sanitisation
Professional sanitisation helps maintain hygiene within the water pathway and supports dependable long-term operation.
Maintain Clear Access
Leave sufficient space around the machine for users, cleaning and servicing. Avoid placing bins or furniture directly in front of the dispenser.
Frequently Asked Questions
What water options are available from the Borg & Overström B3?
The B3 is available in configurations combining chilled, ambient, sparkling and hot water.
Does the B3 need large replaceable water bottles?
No. It is a mains-fed dispenser connected to the building’s potable water supply.
Can the B3 dispense sparkling water?
Yes. Selected versions include DeepSparkle® technology for carbonated water with long-lasting fizz.
Can it dispense hot water?
Yes. Hot-water configurations are available, with a published temperature of approximately 92°C and a stated minimum of 80°C.
How much chilled water can it provide?
The manufacturer publishes an output of up to 30 litres per hour for chilled and sparkling water.
How much hot water can it provide?
The stated hot-water capacity is up to 6 litres per hour.
Can reusable bottles fit beneath the dispenser?
Yes. The B3 has a 265mm dispensing height designed to accommodate sports bottles and jugs.
Does the B3 have touchless controls?
The standard machine uses a flush touch-sensitive panel. An optional footswitch is available for hands-free dispensing.
What colours are available?
The main published finish options are black and silver.
How large is the Borg & Overström B3?
The floorstanding unit measures approximately 325mm wide, 380mm deep and 1,065mm high.
Does it require a drain connection?
A mains waste connection is recommended where available. A compatible alarmed waste kit can be used where permanent drainage is not practical.
What water pressure is required?
The published minimum incoming mains-water pressure is 0.1MPa, equivalent to approximately one bar.
Does the machine require electricity?
Yes. The manufacturer specifies a suitable 10A electrical supply positioned within two metres of the dispenser.
Does the B3 filter the water?
Yes. The installation includes a suitable water filter selected according to the supply and intended usage.
Is the B3 suitable for schools?
Yes. Its height and large bottle-filling area are designed for use by adults and children, subject to appropriate positioning and supervision.
Can Care Vending install and maintain the B3?
Yes. Care Vending can provide installation, filter replacement, sanitisation, preventative maintenance and technical support.
Can I rent the Borg & Overström B3?
Rental, hire and purchase arrangements may be available depending on the chosen configuration, location and service requirements.
Request a Borg & Overström B3 Quotation
The Borg & Overström B3 combines filtered mains-fed water, flexible dispensing options and a compact premium design for modern communal environments.
Contact Care Vending today to discuss machine availability, rental, purchase, installation or a fully managed water-dispenser service.



