AA First ArcticChill 108

AA First ArcticChill 108 Water Cooler

The AA First ArcticChill 108 is a high-capacity mains-fed water cooler designed to provide a dependable supply of fresh chilled water in offices, workplaces, education facilities and other busy commercial environments.

Combining a modern, compact design with a published chilled-water output of up to 35 litres per hour, it can support regular bottle and glass refilling throughout the working day.

Its generous 290mm dispensing height accommodates many reusable bottles, while simple solenoid controls provide straightforward operation. Optional upgrades include contactless dispensing and pre-installed Klaran UVC LED purification.

Care Vending can provide the ArcticChill 108 with professional installation, filtration, sanitisation, planned maintenance and ongoing technical support.


A High-Capacity Chilled Water Solution

The ArcticChill 108 has been designed for commercial locations that require more chilled-water capacity than a standard low-volume office cooler.

AA First publishes an output of up to 35 litres of chilled water per hour, helping the machine maintain a consistent supply during busy periods.

This can make it suitable for workplaces with fixed break times, larger offices, schools, warehouses and other environments where several people may need to refill bottles within a relatively short period.

Actual performance will depend on the incoming water temperature, room conditions and the pattern of use.


Mains-Fed Point-of-Use Water Cooler

The floorstanding ArcticChill 108 is a point-of-use water cooler connected directly to the building’s potable mains-water supply.

This removes the need to store, lift and replace large water bottles. Instead, the machine draws water from the mains and passes it through a suitable filtration system before chilling and dispensing it.

A mains-fed system can help reduce:

  • Storage requirements for replacement bottles
  • Manual handling of heavy water containers
  • Bottled-water delivery administration
  • The risk of running out between deliveries
  • Packaging associated with delivered water

A suitable water connection, isolation valve and filtration system are required as part of the installation.


Direct Chill Cooling System

The AA First ArcticChill 108 uses a Direct Chill system to cool the water before dispensing.

This method is designed to provide a fast and efficient chilled-water supply while limiting the volume of water held in the internal cold tank.

The published cold-tank capacity is one litre, with the machine relying on the performance of the cooling system to support its stated 35-litre-per-hour output.

Direct Chill technology can be well suited to busy environments where users require repeated bottle refills throughout the day.


Chilled Water Temperature Control

The ArcticChill 108 includes thermostat-controlled cooling with a published control range of approximately 5°C to 7°C.

AA First states an output temperature of 10°C or below when tested with an incoming water temperature of 16°C.

The actual temperature of the dispensed water may vary according to:

  • Incoming mains-water temperature
  • Room temperature
  • Frequency of dispensing
  • Ventilation around the cooler
  • Maintenance condition

Correct positioning and regular servicing help the cooling system operate effectively.


Large 29cm Bottle-Filling Area

The ArcticChill 108 provides a generous 290mm dispensing height.

This allows many reusable bottles, sports bottles, glasses and small jugs to fit beneath the outlet.

A larger bottle-filling area can help organisations encourage staff, students and visitors to use reusable containers rather than relying on disposable plastic bottles or cups.

Users should position bottles centrally beneath the outlet to reduce splashing and unnecessary water entering the drip tray.


Simple Solenoid Operation

The dispenser uses simple solenoid-controlled operation.

This provides an uncomplicated user experience, allowing people to dispense chilled water without navigating a complex interface.

The straightforward controls make the machine suitable for shared environments where users may include employees, visitors, students and members of the public.


Optional Contactless Dispensing

Contactless dispensing is available as a pre-installed option.

This allows water to be dispensed without requiring the user to press the standard control directly, helping reduce contact with the machine’s interface.

A contactless setup may be particularly useful in:

  • Healthcare environments
  • Schools and colleges
  • Factories and manufacturing sites
  • Large offices
  • Public-facing facilities
  • High-use communal areas

External surfaces and the dispensing area must still be cleaned regularly as part of the site’s hygiene routine.


Optional Klaran UVC LED Purification

The ArcticChill 108 can be supplied with pre-installed Klaran UVC LED purification.

This optional technology provides an additional water-treatment stage within the dispensing system.

UVC purification should be considered as one part of a wider hygiene programme that also includes suitable filtration, scheduled sanitisation, external cleaning and planned servicing.

Care Vending can confirm whether the UVC option is appropriate for the intended location and level of use.


Integrated Flood Protection

The machine includes integrated flood protection to provide added reassurance within a mains-fed installation.

Flood-protection measures can help limit water release if a potential supply or internal issue is detected.

The cooler should still be installed using the correct plumbing components, isolation arrangements and approved installation procedures.

Optional overflow and waste-management accessories can provide further protection where required.


Floorstanding and Countertop Options

The ArcticChill 108 range is available in both floorstanding and countertop formats.

The floorstanding model creates a standalone hydration point and does not require an existing counter or work surface.

A countertop model may be more appropriate where floor space is limited and a suitable, stable surface is already available.

This page focuses on the WCPC108 floorstanding point-of-use model. Care Vending can discuss alternative ArcticChill configurations where required.


Compact Modern Design

Despite its high published output, the ArcticChill 108 has a relatively compact footprint.

The floorstanding model measures approximately 340mm wide and 340mm deep, allowing it to fit into many reception areas, staff kitchens and communal spaces without taking up excessive floor area.

Its clean appearance is designed to complement modern commercial interiors while providing enough height for convenient everyday use.


AA First ArcticChill 108 Key Features

  • Mains-fed point-of-use water cooler
  • Chilled water dispensing
  • Up to 35 litres per hour published output
  • Direct Chill cooling system
  • Large 290mm dispensing height
  • Suitable for reusable bottles and glasses
  • Simple solenoid operation
  • Integrated flood protection
  • Optional contactless dispensing
  • Optional Klaran UVC LED purification
  • Optional integrated cup dispenser
  • Optional water filtration systems
  • Optional overflow and waste kits
  • One-litre stainless steel cold tank
  • R600a refrigerant
  • Compact 340mm-wide floorstanding design
  • UK three-pin electrical connection

Technical Specifications

Model WCPC108
Machine type Floorstanding point-of-use water cooler
Water output Chilled water
Published chilled capacity Up to 35 litres per hour
Height 1,140mm
Width 340mm
Depth 340mm
Dispensing height 290mm
Weight Approximately 23kg
Water supply Point of use / mains fed
Chilling system Direct Chill
Temperature control Thermostat, approximately 5°C to 7°C
Published output temperature 10°C or below with an inlet temperature of 16°C
Cold tank material STS304 stainless steel
Cold tank capacity One litre
Refrigerant R600a
Condenser Wire type
Cold wattage Approximately 95W
Voltage 220–240V
Published standby usage 0.16kWh over 24 hours
Electrical supply UK three-pin plug
Power-cord length Approximately 1.5 metres

The published output and temperature figures are based on AA First’s stated test conditions. Actual performance may vary according to the installation environment and frequency of use.


Water Filtration Options

A suitable filtration system should be installed with the point-of-use cooler.

AA First offers several filter and installation-rail options, including carbon, nano and higher-capacity filtration bundles.

The most suitable filter will depend on:

  • Local water quality
  • Expected daily consumption
  • Required taste improvement
  • Filter capacity
  • Available installation space
  • Servicing frequency

Filters must be changed at the recommended interval. A filter left in service beyond its intended capacity can restrict flow and reduce water quality.


Optional Overflow and Waste Management

Several pre-installed overflow and waste accessories are available for the ArcticChill 108.

Published options include:

  • Three-litre overflow kit
  • Ten-litre drip-tray overflow kit
  • Mains waste kit
  • Pumped mains waste kit

The most suitable arrangement will depend on the machine location, available drainage and anticipated level of use.

A mains waste connection can reduce the need for manual drip-tray emptying, while an internal container may provide greater installation flexibility where drainage is unavailable.


Optional Integrated Cup Dispenser

An integrated cup dispenser is available as a pre-installed accessory.

This keeps disposable cups close to the water cooler and can help create a tidy, self-contained hydration station.

Organisations encouraging reusable containers may choose not to add a cup dispenser, particularly because the 290mm dispense area is designed to accommodate many bottles and glasses.


Optional Metal Cowling

A metal cowling is available as an accessory for the ArcticChill 108.

This can help provide a more enclosed or coordinated installation, depending on the layout and requirements of the site.

Care Vending can confirm whether a cowling would provide a practical benefit at the proposed location.


Installation Requirements

The ArcticChill 108 requires access to potable mains water and a suitable electrical connection.

The proposed location should provide:

  • A stable and level floor
  • A nearby potable mains-water connection
  • An accessible isolation valve
  • A suitable water filtration system
  • A 220–240V electrical supply
  • Enough space for ventilation
  • Clear access for cleaning and servicing
  • A suitable waste or overflow arrangement where required

A site assessment can help confirm that the water supply, electricity, drainage and available space are suitable before installation.


Supporting Reusable Bottle Filling

The large dispense area makes the ArcticChill 108 particularly useful as a reusable bottle-filling station.

Providing filtered chilled water on demand can encourage staff and visitors to refill their own bottles rather than purchasing single-use packaged drinks.

This may help reduce:

  • Single-use plastic bottles
  • Disposable cup consumption
  • Storage of packaged water
  • Waste collections
  • Delivered-water administration

The overall environmental impact will depend on electricity use, filter replacement and how the dispenser is managed throughout its service life.


Suitable Commercial Applications

The AA First ArcticChill 108 is suitable for commercial environments requiring a dependable high-capacity chilled-water service.

Potential applications include:

  • Corporate offices
  • Factories and manufacturing facilities
  • Warehouses and distribution centres
  • Schools and colleges
  • Universities
  • Healthcare facilities
  • Leisure centres and gyms
  • Hotels and conference venues
  • Public buildings
  • Staff breakout spaces
  • Reception areas
  • Customer waiting rooms
  • Retail staff facilities
  • Community centres
  • High-use communal areas

Complete Water Cooler Support from Care Vending

Care Vending can provide the AA First ArcticChill 108 as part of a complete workplace hydration service.

Our available services include:

  • Water cooler rental or hire
  • Machine purchase
  • Site assessment
  • Professional delivery and installation
  • Mains-water connection
  • Filter and installation-rail setup
  • Waste and overflow solutions
  • Contactless control installation
  • UVC option configuration
  • Initial testing and commissioning
  • Scheduled sanitisation
  • Replacement filters
  • Preventative maintenance
  • Technical support and repairs

Our team will assess expected usage, available services, filtration requirements and peak demand before recommending an appropriate installation package.


Tips for Getting the Best from Your AA First ArcticChill 108

Position the Cooler for Easy Access

Install the machine where users can approach safely without blocking walkways, doors or fire routes.

Use Suitable Water Filtration

Select a filter appropriate for local water conditions and expected consumption. Correct filtration can improve taste and protect internal components.

Replace Filters on Schedule

Do not wait for water flow or taste to deteriorate before replacing the filter. Follow the recommended capacity and service interval.

Clean the Dispensing Area Regularly

Wipe the outlet, controls, drip tray and bottle-filling area frequently, particularly in high-use shared environments.

Consider Contactless Dispensing

The optional contactless control may be worthwhile where the machine is used by a large number of people.

Consider UVC Purification

UVC LED treatment may provide a useful additional hygiene measure alongside filtration, cleaning and planned sanitisation.

Monitor Overflow Containers

If an internal overflow container is installed, empty and clean it regularly to reduce the risk of spills or unwanted odours.

Keep Ventilation Clear

Do not block the cooler’s ventilation areas or install it immediately beside equipment that produces significant heat.

Encourage Reusable Bottles

Promote the large 290mm dispensing area as a convenient refill point for suitable reusable bottles.

Arrange Preventative Maintenance

Professional servicing and sanitisation help protect water quality, cooling performance and long-term reliability.


Frequently Asked Questions

How much chilled water can the AA First ArcticChill 108 provide?

AA First publishes a chilled-water capacity of up to 35 litres per hour.

Is the ArcticChill 108 mains fed?

Yes. The WCPC108 floorstanding model is a point-of-use cooler connected to the potable mains-water supply.

Does it dispense hot water?

The model covered on this page is designed for chilled water only.

What is the dispensing height?

The published dispense height is approximately 290mm, allowing many reusable bottles and glasses to fit beneath the outlet.

How large is the ArcticChill 108?

The floorstanding model measures approximately 1,140mm high, 340mm wide and 340mm deep.

How much does the machine weigh?

The published weight is approximately 23kg.

What type of cooling system does it use?

The ArcticChill 108 uses a Direct Chill cooling system.

What temperature does the water reach?

AA First states an output temperature of 10°C or below when tested with incoming water at 16°C.

Can it dispense water without touching the controls?

Contactless dispensing is available as a pre-installed optional upgrade.

Is UVC water treatment available?

Yes. Klaran UVC LED purification is offered as an optional pre-installed feature.

Does the machine include flood protection?

Yes. AA First lists integrated flood protection as part of the ArcticChill 108 design.

What refrigerant does it use?

The published specification lists R600a refrigerant.

Does it require a water filter?

A suitable water filter and installation rail should be fitted as part of the mains-fed installation.

Can it connect to a drain?

Yes. Optional mains-waste and pumped-waste kits are available. Overflow-container options can also be used where drainage is unavailable.

Is a cup dispenser available?

Yes. An integrated cup dispenser is available as an optional pre-installed accessory.

Can Care Vending install and maintain the ArcticChill 108?

Yes. Care Vending can provide installation, filtration, sanitisation, servicing and technical support.

Can I rent the AA First ArcticChill 108?

Rental, hire and purchase arrangements may be available depending on the location, installation requirements and selected service package.


Request an AA First ArcticChill 108 Quotation

The AA First ArcticChill 108 combines high-capacity chilled-water output, a large bottle-filling area and a compact modern design for busy commercial environments.

Contact Care Vending today to discuss machine availability, rental, purchase, installation or a fully managed water-cooler service.

  • This field is for validation purposes and should be left unchanged.

Areas We Cover

London – Westminster, Camden, Islington, Kensington, Chelsea, Hammersmith, Fulham, Southwark, Tower Hamlets, Croydon

Hertfordshire – Stevenage, Hemel Hempstead, St Albans, Borehamwood, Letchworth, Hatfield, Hitchin, Tring, Watford, Welwyn Garden City, Harpenden, Berkhamsted, Bushey

Bedfordshire – Sandy, Flitwick, Dunstable, Bedford, Luton, Biggleswade, Leighton Buzzard, Ampthill, Shefford

Cambridgeshire – Cambridge, Peterborough, Huntingdon, St Neots, St Ives, Wisbech, March, Ely, Chatteris

Buckinghamshire – Chesham, Marlow, Buckingham, Milton Keynes, Aylesbury, Amersham, Beaconsfield, High Wycombe, Newport Pagnell

Northamptonshire – Northampton, Wellingborough, Kettering, Corby, Daventry, Towcester, Rushden, Brackley

Services Include

  • Machine Rent/Hire
  • Machine Purchase
  • Maintenance and Support
  • Repairs
  • Cleaning
  • Fulfillment and Replenishment
  • Free-On-Loan Vending Machine option may also be available